preload-image

TC HELICON VOICELIVE 3 VOCAL AND GUITAR EFFECTS


Ultimate Vocal and Guitar Effects Floor Pedal with Multi-Track Looping


TC Helicon

675.00

Sold out
PTC001

Out of stock

Description

Imagine the perfect sound engineer taking your vocals to awe-inspiring heights. Imagine the rich tones of a premium stomp box collection. Imagine a songwriting tool setting your creativity on fire, both when writing and performing. Now, stop imagining and fire up VoiceLive 3.

 

VoiceLive 3 gives you a mind-blowing vocal effects path more comprehensive than anything created before. It features 11 independent effects blocks, over 180 different styles, and more than 250 factory presets available right out of the box (and more through free downloads).

 

The guitar section of VoiceLive 3 rivals even the most pristine pedal boards – thanks to legendary FX from TC ELECTRONIC like Flashback Delay, Hall of Fame Reverb, Corona Chorus, and Vortex Flanger. You can also choose just the perfect amp emulation from vintage British to classic American.

 

Looping on VoiceLive 3 gives you the ability to experiment with real-time song creation or exciting loop jams. Arrange and re-arrange backing tracks with flexible verse-chorus-bridge switching. The LoopAssist function helps you make tighter loops effortlessly and auto-expand loops to allow different lengths.

 

You can send your vocal sound to the PA while your guitar sound goes to your favorite amp. This killer feature also works if you’re looping; the stereo vocal loops go to the PA while the stereo guitar loops go separately to the amps. Expand your musical possibilities with exciting, new Harmony modes – Pedal, Fixed, and Mixed-Mode. There’s also an authentic Vocoder with voice-controlled polyphonic synth and robot modes so you can play your voice like an instrument. FX upgrades include new delay filters, new HardTune styles and better sounding doublings.

 

 

Vocal Effects µMod
Echo & Delay
Harmony
Double
Transducer
Rhythmic
HardTune & Correction
Choir
Adaptive Tone
Guitar FX Amp Modeling
Drive
Reverb
Compression
Resonant Filter
Wah
µMod (Flange, Chorus, De-tune)
Shifter

 

Size Height: 3 inches (76 mm)
Width: 13.8 inches (350 mm)
Weight Weight: 5 lb. (2.3 kg)
Construction Anodized extruded aluminum and steel chassis
Rubberized edit/mix knobs
192 x 64 Blue STN LCD, white back light display
Tri-colored Footswitch Light ring
Capacitive touch edit controls with LED indicators
Analog Inputs Voice
Connector: Combo Balanced XLR/Balanced TRS 1/4″ phone jack
Input Impedance Balanced: 3.08 kOhm
Mic Input Level @ 0 dBFS: -52 dBu to +7 dBu
Line Input Level @0dBFS: -40 dBu to +19 dBu
EIN @ Max Mic Gain Rg = 150 Ohm: -127 dBu
Mic SNR >100 dB at typical Mic Input gain
Phantom Power: +48V (on/off via setup menu)
A to D Conversion 24 Bit, 128 x oversampling bitstream, 110 dB SNR A-weighted
Guitar
Connector: 1/4″ phone jack
Guitar Input Impedance: 1 MOhm
Guitar Input Level @ 0 dBFS: -2 dBU to 14 dBu
Guitar Input SNR >108 dB
A to D Conversion 24 Bit, 128 x oversampling bitstream, 110 dB SNR A-weighted
Monitor
Connector: Balanced XLR
Input Impedance Balanced: 25 kOhm
Monitor Input Level @ 0 dBFS +16 dBu
Aux
Aux: 1/8″ stereo mini jack
Aux Input Level @ 0 dBFS +2 dBu
Analog Outputs Voice
Connectors: balanced XLR
Output Impedance Balanced/Unbalanced: 300/150 Ohm
Output Range 0 dBFS Line Level: +14 dBu; Mic Level: – 2dBu
Dynamic Range >109 dB, 20 Hz to 20 kHz/li>
Frequency Response +0/-0.3 dB, 20 Hz to 20 kHz
D to A Conversion 24 Bit, 128 x oversampling bitstream, 115 dB SNR A-weighted
Guitar
Connectors: 1/4″ TRS phone jack
Output Impedance Balanced/Unbalanced: 442/221 Ohm
Output Range 0 dBFS Line Level: +14 dBu; Mic Level: – 2dBu
Dynamic Range >105 dB, 20 Hz to 20 kHz note
D to A Conversion 24 Bit, 128 x oversampling bitstream, 106 dB SNR A-weighted
Headphone
1/8″ Mini stereo jack, 50 Ohm, +14 dBu max
Guitar thru
Buffered Guitar Input
Connector: 1/4″ TRS phone jack
Output Impedance Bal/UnBal: 270/540 Ohms
Monitor thru
Direct connection to Monitor input
Connector: Balanced XLR
Control USB: USB A, Mini-B
MIDI: In/Out: 5 Pin DIN
Pedal: 1/4″ TRS phone jack
Mic Control using TC Helicon MP-75 Microphone, MP-76 Microphone or Sennheiser e 835 fx mic
Power External Power Supply Mains Voltage: 100 to 240 VAC, 50 to 60 Hz (auto-select)
Power Consumption: < 14 W
Safety – certified to: IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA
Safety EMC – Complies with: EN 55103-1:2009, EN 55103-2:2009, FCC CFR 47 Part 15B and ICES-003:2004 4th Ed
Safety – certified to: IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA
Storage Temperature: -22° F to 167° F (-30° C to 70° C)
Humidity: Max. 90 % non-condensing
Environment Operating Temperature: 32° F to 122° F (0° C to 50° C)
Storage Temperature: -22° F to 167° F (-30° C to 70° C)